Introduction to Humidification Systems

Humidification is the artificial regulation of humidity in environments. When the atmosphere becomes too dry, moisture is drawn from surrounding materials within the environment such as furniture, paper, textiles, fruit, animals and even people. Low relative humidity is not only uncomfortable, it can be damaging to equipment and materials. It also causes static electricity to generate which in turn produces unpleasant effects in many cases.

The sonicom™ fogging nozzle is ideal for increasing the level of relative humidity within a room by introducing moisture back into the air without causing wet areas or excessive water drop out.

Ultra fine fogs down to only 1 micron (0.001mm) are possible therefore ensuring the soft plume of water droplets remain in suspension until evaporation takes place. When complemented with our special water valve assembly, the unit becomes a highly efficient self cleaning atomiser.

The heavy duty stainless steel water valve is controlled by the same compressed air supply used to activate the nozzle. A simple on/off signal is required to activate the system and when the signal is removed, the water valve self cleans the nozzle every time by blowing excess water away, significantly reducing lime, salts and chalk build-up.

In large industrial applications, nozzles can be mounted in the roof space to raise humidity levels without over fogging. Significant advantages may be achieved without reducing visibility and safety. Factories where inflated humidification is needed can be economically improved.

Leaders in Spray Technology Humid Humid

 

ULTRASONIC WALL MOUNTED HUMIDIFIER

Our Industrial Ultrasonic Humidifier features a small wall mountable enclosure of dimensions 400W x 300H x 100D simply fed with a fresh water supply and a 230vAC50Hz electrical supply, protected with 9 amps.

The unit is easy to install with a Ø6mm constant water feed which is regulated internally by means of an electronic water level sensor. A bank of 10 transducer elements give an output up to 3 litres per hour of ultra-fine fog - droplets of 4 micron and less. Flow from a front output point is assisted be means of an internal 12vDC fan ensuring a good distribution into the volume being humidified.

At only 27dB, the unit is ideal for office, library, museum and other such noise sensitive areas and the built-in UV LED in the water tank affords protection against Legionella and other possible bacteria concerns.

Our unit features a unique built -in timer system offering a 24 hour digital clock with on and off setting for the days of the week and the function to take out weekends or any day of the week plus delay times. Coloured LED displays signal Standby/Active/Operational conditions.