Humidification Systems for Electronics
Humidification is the artificial regulation of humidity in the environment. When the atmosphere becomes too dry, moisture is drawn from surrounding materials, which has a detrimental effect on your product. Low relative humidity is not only uncomfortable, it can also be damaging to equipment and materials.
The Sonicom fogging nozzle is ideal for increasing the level of relative humidity within a room or process by introducing moisture back into the atmosphere without causing wet areas or excessive water drop out.
Ultra-fine fogs down to only 1 micron (0.001mm) are possible, therefore ensuring the soft plume of water droplets remain in suspension until evaporation takes place. When complemented with our special water valve assembly, the unit becomes a highly efficient non-drip, self-cleaning atomiser.
The heavy duty stainless steel water valve is controlled by the same compressed air supply used to activate the nozzle. A simple on/off signal is required to activate the system and when he signal is removed, the water valve self-cleans every time the nozzle is turned on/off, it does not drip meaning there is no risk of having a blocked nozzle, allowing for use in environments where control is essential and access limited.
Nozzles are controlled by a Sealpump control panel, which switches the system on/off automatically to provide the stable humidification levels required. Sealpump can work with you to design a highly efficient Dry Fog humidity control system with controls that can link into existing processes.
The Dry Fog humidification systems provide an economical, low maintenance and low energy consuming humidity control solution, capable of achieving up to 99% rh.